VDO OceanLink 7 Instrucciones Para El Uso página 55

1. Press the MENU button and select SCREEN CONFIG.
2. Scroll until you see an empty page ("NO SCREEN") and select it.
3. Scroll and select the page layout TRIPLE: the layout opens with the first box green.
4. Press the ENTER button and select the engine whose parameters are to be displayed: the box
layouts appear.
5. Select the layout SINGLE: the page layout reappears with the box red.
6. Scroll and select the required data: the box turns green.
7. Place the cursor on another box and select the engine whose parameters are to be displayed and
then the box layout TRIPLE: the page layout reappears with the box divided in three sectors.
8. Select the sector to be set: the sector border turns red.
9. Scroll and select the required data: the sector border turns green.
10. Press MENU to select the box: the box border turns green.
11. Scroll and select the last box and repeat steps 4-5-6.
12. Hold down the MENU button to save settings and return to the data page.
Add a page with a bar graph layout
1. Press the MENU button and select SCREEN CONFIG.
2. Scroll until you see an empty page ("NO SCREEN") and select it.
3. Scroll and select the page layout GRAPH.
4. Select the engine whose parameters are to be displayed: the layout opens with the first bar graph
green.
5. Press the ENTER button: the bar graph turns red.
6. Scroll and select the selected data: the bar graph turns green.
7. Scroll and place the cursor on the next bar graph and repeat points 5 and 6.
8. Scroll and place the cursor on the last bar graph and repeat points 5 and 6.
9. Hold down the MENU button to save settings and return to the data page.
Add a page with an analog gauge layout
An example of how to add a page with a NAV DASH three gauge layout is provided below.
1. Press the MENU button and select SCREEN CONFIG.
2. Scroll until you see an empty page ("NO SCREEN") and select it.
3. Scroll and select the page layout Nav Dash 2: the layout opens and the center of the first gauge is
green.
4. Press ENTER: the gauge center turns red.
5. Scroll and select the selected data: the gauge center turns green.
6. Scroll and place the cursor on the next gauge and repeat points 4 and 5.
7. Scroll and place the cursor on the last gauge and repeat points 4 and 5.
8. Hold down the MENU button to save settings and return to the data page.
Delete a page
1. Press the MENU button and select SCREEN CONFIG.
2. Scroll until you see the page to be deleted and select it.
7" TFT display | Operating instruction v. 1.0 | © 2018 Continental Automotive Switzerland AG
Data page configuration
55