VDO OceanLink 7 Instrucciones Para El Uso página 61

Alarm management
Menu layout ALARMS
Acknowledge an alarm
When an alarm is triggered, the Alarm page appears and the buzzer sounds (if connected).
To acknowledge the alarm and mute the buzzer, press any button on the keyboard: the page closes and
the alarm is saved in the Active alarms page. The alarm is displayed in the Active alarms page for as
long as it remains active.
View the active alarm list
If at least one alarm is active, scroll the data pages or press the MENU button and select ALARMS >
Active alarms: the Active alarms page appears. Alarms are listed from the most to the least severe.
Configure alarms from sensors
1. Press the MENU button and select ALARMS > Config alarms popup.
2. Select one of the alarms from the sensors.
3. Select No and select Yes: parameters appear.
4. If necessary, select and edit the threshold(s) and enable/disable the buzzer.
Configure alarms from NMEA 2000/SAE J1939 network
1. Press the MENU button and select ALARMS > Config alarms popup.
2. Select CAN and the network: the managed alarm list appears.
3. Select one of the alarms from the network.
4. If necessary, enable/disable the alarm signal in the Alarm window and enable/disable the buzzer.
7" TFT display | Operating instruction v. 1.0 | © 2018 Continental Automotive Switzerland AG 61