Un-Lock To Set Torque - Bahco 7455 Guia Del Usuario

BAHCO 7455 / 7456 TORQUE WRENCH BAHCO 7455/7456/7435/7445
ADJUSTMENTS OF TORQUE SETTINGS
MAJOR
GRADUATIONS
THIMBLE EDGE
A To unlock handle hold tube and pull lock ring back allowing
handle to turn CW or CCW.
B Set wrench to desired torque as follows:
EXAMPLE – 64 ft.lbs.
1. Keep slight rearward pull on lock-ring during all adjustments.
2. Line up thimble edge with the "60" graduation cross line and
zero vertical line. Wrench is now set at 60 ft.lbs. (See Figure I)
3. Turn handle and set thimble graduation to "4" on vertical line.
Wrench is now set at 64 ft.lbs.(See Figure II)
Figure I
6
MINOR
GRADUATIONS

UN-LOCK TO SET TORQUE

LOCK RING
Figure II
HANDLE