Kenmore 110.88752 Manual De Uso página 17

1. Move Laundry Center toitsfinal l ocation a ndremove any
cardboard used tomove Laundry Center.
2. Locate r emovable tiestrap included i nparts package.
(2Z>
Removable tie strap
3. Wrap the drain hose to the laundry tub leg or standpipe with
the removable tie strap (A or B below) and secure.
A B C
If the water faucets and the drain standpipe are recessed, put
the hooked end of the drain hose in the standpipe. Tightly
wrap the removable tie strap around the water inlet hoses
and the drain hose (C above).
Choose your exhaust installation type
Recommended exhaust installations
Typical installations vent the dryer from the rear of the Laundry
Center. Other installations are possible.
....................... D
A
C ................. _ H
A. Dryer
B. Rigid metal or flexible metal vent
C. Clamps
D. Waft
E. Elbow
F. Clamps
G. Elbow
H. Exhaust hood
Optional exhaust installations
This Laundry Center can be converted to exhaust out the right
or left side. To convert the Laundry Center, use Side Exhaust Kit
Part Number 279823. If your Laundry Center was previously
exhausted from the right or left side, it can be converted to rear
exhaust by using standard offset connections. To cover the hole
in the side, one of the following plugs can be added:
692790 (white)
3979370 (graphite)
3977784 (biscuit)
Follow the instructions in the kit to install. Kits are available from
your local Sears store or Sears Service Center.
,%£L [
A B C
A. Standard rear offset exhaust installation
B. Rear exhaust for offset close clearance connection
C. Left or right side exhaust installation
Alternate installations for close clearances
Venting systems come in many varieties. Select the type best for
your installation. Three close-clearance installations are shown.
Refer to the manufacturer's instructions provided with the vent
system.
, ,, ,,,,
A B C
A. Loop system with standard elbows
B. Loop system with one offset and one standard elbow
C. Vent system with one periscope (2" [50 mm]
clearance)
NOTE: The following kits for close clearance alternate
installations are available for purchase. To order, please call
1-800-4-MY-HOM E® (1-800-469-4663).
17