Commercial Electric 17067 Guía De Uso Y Cuidado página 9

Installation (continued)
3
Installing under a cabinet
To surface mount the LED tape light under a set of cabinets in one continuous run, you may need to drill a 1/2" hole through any
□
cabinet side lip that may be present. Install LED tape light through the hole and surface mount as a continuous run.
Mounting too
close to lip
may create an
undesired
shadow
□
When mounting under a cabinet or a shelf with no lip to hide the LED tape light strip, create a visual barrier by using trim strip molding
mounted in front of the LED tape light.
4
Creating above cabinet uplighting
Most cabinet tops have uneven surfaces. To create beautiful indirect uplighting over cabinets, simply mount the LED tape on any rigid
□
strip (e.g., thin lattice or corner guard molding) and place on top of cabinets. Angle the strip position to achieve the desired illumination.
For a seamless glow and to avoid bright light spots, keep LED tape light strip at least 3/4" away from walls.
□
The LED tape has a wide
120 degree beam angle
CEILING
Mount LEDs 3/4" or
greater from wall to
avoid bright spots.
CEILING
9
Please contact 1-877-527-0313 for further assistance.
Mount inside of lip
for wall wash effect
CEILING
HOMEDEPOT.COM