Attaching A Wall Mount Bracket (Sold Separately) - FUNAI F42PDME Manual Del Usuario

A
TTACHING A WALL MOUNT BRACKET (SOLD SEPARATELY)
The following is a description of the method for attaching a wall mount to the plasma display.
When performing this operation, refer to the instruction manual included with the wall mount
kit.
# CAUTION
• Any damage caused by incorrectly attempting to mount the plasma display is not covered under the
terms of the manufacturers warranty.
1
1
Turn the plasma display over and place it
screen-first onto a table which has a soft cloth
draped over it.
Place the plasma display in a way so that the
stands hang over the edge of the table.
NOTE:
• Make sure to use a table which can support the
weight of the plasma display and is larger than the
plasma display.
• Make sure the table is in a stable location.
2
Remove the stands from the plasma display.
Unscrew the M5 screws indicated by
remove the left and right stands.
NOTE:
• The screws and stands you have removed are
necessary for reattachment at a later date. Make
sure to keep them in a safe place.
2
AC IN AUDIO AUDIO
AUDIO OUT R L VIDEO S-VIDEO
R L Y Cb Cr
VIDEO1
L COMPONENT1
S-VIDEO1
VIDEO2
R COMPONENT2
S-VIDEO2
R L VIDEO S-VIDEO R L Y Pb Pr
Stand
3
Attach the left and right TV rails to the plasma
display using the M8 screws included with the
wall mount kit.
indicates the position of the screw holes on
2
the plasma display
NOTE:
• Only use the screw holes indicated by
mounting the plasma display.
• For instructions on how to attach the TV rails,
refer to the instruction manual included with the
mount wall kit.
and
1
4
Attach the plasma display to the wall.
NOTE:
• Refer to the instruction manual included with the
wall mount when securing the plasma display to
the wall.
Plasma Display rear
1
2 for
21