ENGLISH
DMX Channel Mode
Used to select the desired channel mode.
Select "DMX Channel Mode" and press ENTER
Use DOWN / UP buttons to select the desired
DMX channel mode.
Press the ENTER button to save.
To return without any change or go to a previous
menu, press the MENU button.
View DMX Value
Select "View DMX Value" and press ENTER.
The display now shows the DMX-values for the
different channels.
To return to a previous menu, press the MENU
button or after 60 seconds the display will
automatically return to normal mode.
Fixture Settings
This submenu contains specific fixture settings.
Press the MENU button and select the "Fixture
Settings" submenu.
Pan Inverse
No: Panning movement is not inverted.
Yes: Panning movement is inverted.
Select "Pan Inverse" and press ENTER
Use DOWN / UP buttons to select Yes or No.
Press the ENTER button to save.
To return without any change or go to a previous
menu, press the MENU button.
Tilt Inverse
No: Tilt movement is not inverted.
Yes: Tilt movement is inverted.
Select "Tilt Inverse" and press ENTER
Use DOWN / UP buttons to select Yes or No.
Press the ENTER button to save.
To return without any change or go to a previous
menu, press the MENU button.
P/T Feedback
While touching the head of the projector, the pan/tilt
positioning can be disturbed and not in sync with the
other machines. P/T Feedback can automatically
correct such issues.
No: Pan/Tilt are not automatically corrected.
Yes: Pan/Tilt are automatically corrected.
Select "P/T Feedback" and press ENTER
Use DOWN / UP buttons to select Yes or No.
Press the ENTER button to save.
To return without any change or go to a previous
menu, press the MENU button.
Bl.O. P/T Moving
"Blackout while Pan/tilt are moving": while
pan/tilt positions are changing the projector can cut
off the output to obtain a special effect.
No: output stays on during pan/tilt movements.
Yes: output shuts off during pan/tilt movements.
BRITEQ
®
4/96
OPERATION MANUAL
BT-W37L10 ZOOM