Glow Fire Jupiter Manual De Instrucciones página 3

INSTALLATION AND IMPORTANT NOTES:
Remove all packaging materials. Check that all necessary parts are present; if parts are
•
damaged or missing, contact your reseller.
Before first use, verify that the mains voltage matches the information on the name-
•
plate.
• The device must not be used in potentially explosive atmospheres where materials such
as fuel, thinners, paints and varnishes are stored.
• Caution: In order to avoid overheating, the heating must not be covered.
• Do not place this electric fireplace directly on carpets or other similar floor coverings.
This should avoid possible discoloration due to the heat.
• Do not use this heating in the immediate vicinity of a bathtub, shower or swimming
pool.
• Do not operate the power plug with wet or damp hands.
Pull the plug before each cleaning and when the device is not in operation.
•
Do not connect the device to a damaged power outlet.
•
• Do not place objects inside the device and prevent foreign objects from entering the de-
vice. This can lead to electric shock, fire or damage to the heating.
• Do not move the device during operation.
• If the power cord is damaged, it must be replaced by the manufacturer, its customer ser-
vice or a similarly qualified person to avoid a hazard.
• This device is intended for use in homes and similar applications
This heating device is not suitable for installation in vehicles and machines.
•
• WARNING: This heater is not equipped with a device to control room temperature. Do
not use this heating in small rooms if they are inhabited by persons who are unable to
leave the room alone, unless permanent supervision is provided.
3