Glow Fire Jupiter Manual De Instrucciones página 8

Installation Stand
STEP 6A:
Fix the J1 and J2 metal parts with screws (G), a total of two sets. The two tripod holders (F) are
fastened to the screws J1 / J2.8 (D) with screws (D).
STEP 6B:
Place the fireplace on a soft flatsurface, see the drawing above. Fasten the skirting board with
screws (D). Tighten each screw with a screwdriver.
Operation
Power
Make sure the ON/OFF switch is in the OFF position on the left. Connect the device to a power
outlet (see IMPORTANT SAFETY NOTES pages 2). Make sure that the socket is in good condition
and that the plug is not loose. NEVER
exceed the maximum current for the circuit. Do not connect other devices to the same circuit.
How
this electric fireplace can be operated by the CONTROL PANEL, which is on the right, or with the
included remote control. The operation and functions of the two methods are the same. Please
read the IMPORTANT SAFETY NOTES on pages 2 and 3 before operation.
8