auna Kara Illumina Manual Del Usuario página 20

When finished programming, tap PLAY BUTTON to
confirm and start program play. The PROG INDICA-
TOR in the LED DISPLAY will light. While playing,
you may tap the NEXT or PREV BUTTON to skip to a
desired song in the program list.
To stop program play temporarily, tap the STOP BUTTON once. The PROG INDICATOR in the LED DIS-
PLAY and TV screen (as shown below) will remain ON. Tap PLAY BUTTON to resume program play.
Note: if you tap the STOP BUTTON twice consecutively, you will cancel program play and erase the
program list permanently. The PROG INDICATOR in the LED DISPLAY and TV screen will go OFF.
In stop mode, you can review the program list by pressing the NEXT or PREV BUTTON.
Input Functions
• DC JACK: Connect the DC plug of the DC12V output AC Adapter (included) to this jack.
• USB JACK: Connect a USB flash drive (FAT32 formatted) up to 32GB (not included) to this jack for
playback of MP3 files.
• AUX IN JACK: Connect the 3.5mm stereo plug of a stereo audio cable (not included) to this jack and
the other end to an external audio player for playback.
• MIC 1 / MIC 2 JACKS: Connect the microphone to either one of the jacks to sing.
Output Functions
• VIDEO OUT JACK: Connect the yellow coded RCA plug of the A/V cable (included) to this jack and the
other end to the VIDEO/AV INPUT of your TV.
• AUDIO OUT JACKS (L/R): Connect the white coded RCA plug (L) and red coded plug (R) of the A/V
cable (included) to these jacks and the other end to the audio inputs of your TV.
• SPEAKER: There is one built-in speaker for this unit.
Karaoke Control Functions
• MASTER VOLUME: Adjust this to obtain the desired volume level from the built-in speaker.
• BALANCE CONTROL: Adjust this to obtain the optimum music and vocal levels while playing a CD+G
or file or as left (L) and right (R) channel balance while playing ordinary stereo sound tracks of CD
or MP3.
• AVC (AUTOMATIC VOICE CONTROL): Adjust this to obtain the desired AVC sensitivity. When you
rotate clockwise to increase the sensitivity, the vocals on a multiplex recording are eliminated as
soon as the singer begins singing into the microphone. When the singer stops singing, the vocals on
the multiplex recording are automatically re-activated. This function is used primarily during practice
sessions.
20
www.auna.de