Publicidad
Idiomas disponibles
Idiomas disponibles
speaker controls
high Frequency level adjust
With the HF setting on the '0' position, the speaker will give you a neutral sound with no additional adjustments made. Switching to the '+db' position will
give the high frequencies a boost, giving you more clarity and presence in the treble while switching to the '-db' will do the opposite. This position can
be useful if you want more prominence in the bass frequencies.
mid Frequency level adjust
With the Mid setting on the '0' position, the speaker will give you a neutral sound with no additional adjustments made. Switching to the '+db' position
will give the Mid frequencies a boost, giving you warmer sound with more presence in the vocal register while switching to the '-db' will do the opposite.
boundary compensation switch
When a speaker is placed near a corner or wall it can sometimes make the bass too 'boomy' as low frequencies reflect off the nearby surfaces. If the bass
is too 'boomy' for your liking then, like a port bung, the Boundary Compensation switch can be used to dampen the bass being produced by the speaker.
NOTE: As with all audio, the settings you chose to use are subject to your own personal tastes and the affect your room has on the acoustics.
Experimentation is strongly advised to find the best setting for you.
In-Ceiling Specifications
Frequency Response
Impedance
Sensitivity (1W@1m)
Maximum SPL
Power Handling (RMS)
Recommended Amp
Requirements
Crossover Frequency /
2.8kHz @ 12dB/ Octave
Slope
1x 5" MMP®II bass driver.
Drive Unit Complement
1 x 1" (25mm) C-CAM®
pivoting gold dome tweeter
Adjustment Controls
High Frequency Level switch
Overall Diameter
Overall Depth
Cut Out Diameter
Mounting Depth
Fixing Type
Construction Material
Pre construction Bracket
Weight
CP-CT150
CP-CT260
75Hz - 25kHz
66Hz - 25kHz
6 Ohms
6 Ohms
85dB
88dB
102.8dBA
106.9dBA
50W
65W
20 - 50W
20 - 65W
2.6kHz @ 12dB/ Octave
1x 6" C-CAM cone bass driver.
1 x 1" (25mm) C-CAM pivoting
gold dome tweeter
+3db / 0dB / -3dB
+3db / 0dB / -3dB
High Frequency Level switch &
Boundary compensation switch
250mm (9
")
285mm (11
13/16
155mm (6
1/8
")
212mm (8
")
244mm (9
3/8
151mm (5
")
15/16
CB6 (Purple)
CB8 (Green)
4lb 12oz (2.14kg)
6lb 2oz (2 kg)
CP-CT380
50Hz - 25kHz
6 Ohms
89dB
109.6dBA
120W
30 - 120W
2.5kHz @ 12dB/ Octave
1x 8" C-CAM cone bass driver featuring RST
1 x 1" (25mm) C-CAM pivoting gold dome
tweeter
+3db / 0dB / -3dB
High Frequency Level switch & Boundary
compensation switch
")
1/4
")
5/8
3 Position Tri Grip® Dog Leg Fixings
Mineral Filled ABS Plastic (RoHS2 Compliant)
8lb 4oz (3.74kg)
monitoraudio.com
monitoraudio.com
CP-CT380IDC
50Hz - 30kHz
6 Ohms
89dB
109.6dBA
120W
30 - 120W
Low Pass: 300Hz @ 6dB/ Octave
Mid: 300Hz @6dB/Octave
Treble: 3kHz @ 12dB/Octave
1x 8" C-CAM cone bass driver featuring RST.
Dual concentric module housing:-
1 x 4" C-CAM 'inverted'
mid-range driver
1 x 1" (25mm) C-CAM gold dome tweeter
+3db / 0dB / -3dB
High Frequency Level switch,
+3db / 0dB / -3dB
mid-range level switch,
Boundary compensation switch
309mm (12
")
3/16
187mm (7
3/8
")
274mm (10
")
13/16
172.8mm (7
")
1/8
CB10 (Light Brown)
9lb 8oz (4.3kg)
5
5
Publicidad
