Mobile Phone; Speed Dial; Conference Call Function - N-Com B601 S Serie Manual Del Usuario

7

MOBILE PHONE

To pair up a mobile phone to the B601 system, follow the procedure illustrated in Chapter 6.
Answering a phone call
Vocal answer (VOX phone)
Voice call
Hanging up/rejecting a phone call
Manual phone connection
7.1

Speed dial

Using the N-Com EASYSET program, you can store up to 3 of your favourite numbers, which
you will be able to dial from the " Speed Dial " menu.
Saving the Speed Dial numbers
To assign one or more speed dialling numbers:
 Put the system in the "Configuration" mode: starting from a switched off system, press the "ON" key and keep
it pressed for 4 seconds, until you hear the voice announcement " Configuration Menu ".
 Press the "" or "" key until you hear the voice command " Speed dial ".
 Press the "ON" confirmation key. You will hear the voice announcements " Speed dial 1 " and " Phone
connected ".
 Press the "" or "" keys to select the speed dialling number to be assigned. The saved position is
confirmed by the voice announcement " Speed dial 1 "/ " Speed dial 2 " / " Speed dial 3 ".
 On your own mobile phone (paired up and connected to the N-Com system), call the phone number you
wish to assign to the selected speed dialling position. The call is interrupted before it goes through, and the
selected number will be saved; at this point you will hear the special voice announcement confirming the
selection (" Save Speed Dial 1 " / " Save Speed Dial 2 " / " Save Speed Dial 3 ").
Using the stored numbers
To access the "Speed Dial" menu, press at the same time the "ON" and "" keys (" Speed Dial") , then use the
keys "" and "" to scroll through the menu items.
Then press the "ON" key to confirm the selection of one of the following items:
 Last number redial
 Speed Dial 1
 Speed Dial 2
 Speed Dial 3
 Cancelled
If you wish to exit the "Speed Dial" menu, press the "" and "" keys until you hear the command
" Cancelled ", then press "ON" to confirm.
N.B.: If no key is pressed within 15 seconds, the system exits the "Speed Dial" menu.
7.2

Conference call function

When a call comes in on a mobile phone connected via Bluetooth to B601, the intercom is temporarily turned
off. However, if you wish to share the phone call with the other helmet, simply turn on the intercom manually
during the phone call.
Briefly press any key when you hear the incoming call signal.
When you hear the ringtone, say any word out loud.
You can enable / disable the "VOX phone" function by using the N-
Com EASYSET program. The function is not active during the
intercom connection.
Press "ON" and keep it pressed for about 2 seconds.
Press "ON" and keep it pressed for about 2 seconds.
Press "ON" and keep it pressed for about 2 seconds.
13