Technical Details - DENTSPLY QHL75 Guia De Funcionamiento

TECHNICAL DETAILS

AC INPUT RATING:
FUSE RATING:
LAMP RATING:
Protection from Electric Shock:
Protection against ingress of water:
Operation Mode:
Operating Environment:
Temperature:
Relative Humidity:
Atmospheric Pressure:
Transport and Storage Conditions:
Temperature:
Relative Humidity:
Atmospheric Pressure:
Dimensions:
Height: (base):
(with hand-piece):
Width:
Length:
NOTE: - Models 502, 503, 504 and 506 meet all of the following Safety Standards.
- Model 505 is pending approval certifications.
Complies to following Directives/Standards:
CE - 93/42/EEC
CE - 89/336/EEC
IEC 601-1
IEC 601-1 Am.1
IEC 601-1 Am.2
EN 60601-1
EN 60601-1-2
NOTE: A QHL75 Curing Light Repair Manual is available upon request from DENTSPLY.
®
MODEL 506:
MODEL 502, 503, 504, 507:
MODEL 505:
MODEL 506:
MODEL 502, 503, 504, 507:
MODEL 505:
75W, 11V
Type BF Applied Part
IEC Equipment Class I
Ordinary Equipment
Continuous operation with intermittent loading:
(1 min./5 min. = 1 min. ON / 5 min. OFF)
NOTE: Equipment not suitable for use in the presence of a flammable
anesthetic mixture with air or with nitrous oxide.
10 to 25 deg. Celsius
30% to 75% (non-condensing)
700 to 1060 hPa
-40 to +70 deg. Celsius
10% to 100% (non-condensing)
500 to 1060 hPa
3.62 inches (9.18 cm)
9.12 inches (23.15 cm)
6.00 inches (15.22 cm)
6.13 inches (15.55 cm)
- MDD Directive
- EMC Directive
- 1988 - Medical Electrical Equipment (General Requirements for safety)
- 1991 - Amendment 1 to IEC 601-1
- 1995 - Amendment 2 to IEC 601-1
- 1993 - Medical Electrical Equipment (General Requirements for safety)
- 1993 - IEC 601-1-2: Medical electrical equipment Part 1: General requirements for safety 2:
Collateral standard: Electromagnetic compatibility - Requirements and tests
120V, 50/60Hz, 2.0A
230V, 50/60Hz, 1.0A
100V, 50/60Hz, 2.0A
T2.5A, 250V
T1.6A, 250V
T2.5A, 250V
Hand-piece cord
length (approx.):
Power cord length:
Weight:
English
80.0 inches (203.0 cm)
120 inches (305.0 cm)
5.78 pounds (2.63 kg)