VOX Amplification StompLab IIB Manual De Usuario página 15

q Is the expression pedal fully returned when volume, [AMP/DR]
VALUE1 knob (GAIN) and VALUE2 knob (LEVEL) are set as the
target funciotn of the expression pedal?
3. Effects don't apply
q Could an effect be off?
q Is the [MOD] VALUE 2 knob (DEPTH) or the [DLY] or [REV] VALUE
2 knob (MIX) set to a low value?
q Is the StompLab in Bypass mode?
Refer to "Bypass and Mute" (p. 8) and cancel the Bypass function.
4. High frequencies are distorted when using [PDL] (PEDAL)
AC (ACOUSTIC)
q Are you applying too much drive? Lower the [AMP/DR] VALUE
1 (GAIN) setting.
q Are you using a bass that has high output humbucking pickups?
Lower the volume of your bass.
5. Sound source connected to the bass amp is distorted, or
sounds wrong
q Is the VALUE 1 knob (StompLab output jack connection volume)
in [GBL] set at Ln (LINE)?
Set to AP (AMP).
q Is the VALUE 2 knob (LEVEL) in [AMP/DR] or the VALUE 2 knob
(MASTER LEVEL) in [GBL] set too high?
Specifications
Number of effects:
Number of programs:
Audio input:
Audio output:
Signal processing:
Tuner:
Calibration:
Power supply:
Battery life
Dimensions (W X D X H):
Weight:
Included items:
Options (separately sold):
* Specifications and appearance are subject to change without notice
for improvement.
Pedal types: 9
Amp/Drive Models: 18
Cabinet Models: 12
Modulation types: 9
Delay types: 8
Reverb types: 3
Noise Reduction: 1
Volume Pedal: 1
120 (20 user/100 preset)
INPUT (mono)
OUTPUT/PHONES (stereo)
A/D conversion: 24 bit
D/A conversion: 24 bit
Detection range : A0–E6
A=438 – 445 Hz
Four alkaline AA batteries or
DC9V AC adapter (separately
sold)
7.5 hours (using four alkaline
AA batteries)
207 X 125 X 64mm /
8.15" X 4.92" X 2.52"
780 g / 1.72 oz.
Owner's manual, four AA-size
batteries
DC9V AC adapter
15