Airwell RC4 MURC4 Manual Del Usuario página 6

6
ADJUSTMENT OF THE SWITCH-ON AND SWITCH-OFF
TIMES
After selecting a programming function (T1, T2 or WKT1, WKT2),
proceed as follows to adjust the programmed switch-on and
switch-off times.
EXAMPLE: Air conditioner switch-on at 10:30 (a.m.) and switch-
off at 18:30 (6:30 p.m.)
1 Press the SET key
The ON (switch-on) icon and the switch-on time flash.
2 Adjust the hour and minutes.
1. Set the switch-on time (ON) to 10:30
2. Press the HOUR + key to increase the time or the HOUR - key to
decrease it.
3 Press the SET key.
1. The switch-on time is programmed for 10:30 (a.m.) (the ON icon
2
flashes ).
2. The "OFF" (Switch-off) icon and the switch-off time flash.
4 Adjust the hour and minutes.
1. Set the switch-off time (OFF) to 18:30 (6:30 p.m.)
2. Press the HOUR + key to increase the time or the HOUR - key to
decrease it.
5 Press the SET key.
The switch-off time is programmed for 18:30 (6:30 p.m.) (the "OFF"
icon of the programming function comes on steadily).
REMARKS: REMARKS: REMARKS: REMARKS: REMARKS:
1. The implicit settings of the programming functions are 7:00 and
18:00 (7 a.m. and 6 p.m.) for the switch-on and switch-off times.
2. The programming mode will always display the last switch-on and
switch-off settings on the LCD display.
3. Pressing the CLEAR key (18) for 5 seconds cancels all the
programming function settings and erases the display of the
programming.