Technical Specifications - Rane RAD26 Guia Del Usuario

Appendix (English)

Technical Specifications

Parameter
Signal Indicators
Overload Indicators
Microphone Input Specs (level set in software) (2.54 mm Euroblock Terminal)
Input Impedance
Gain Range
(dynamic mic mode)
Gain Range
(condenser mic mode)
Max. Input
(dynamic mic mode)
Max. Input
(condenser mic mode)
Equivalent Input Noise
CMRR
Frequency Response
THD + Noise
Phantom Power
Balanced Line-Level Input Specs (2.54 mm Euroblock Terminal)
Input Impedance
Gain Range
Max. Input level
Frequency Response
Dynamic Range (input)
THD + Noise
Line+ Mode
Max. Input Level L+R
Auxiliary Input (3.5 mm Stereo TRS Switching Connector)
Gain
Max. Input Level
Dynamic Range (input)
Frequency Response
THD + Noise
28
Specification Limit Units Conditions/Comments
-50 typ.
-0.5 typ.
2.16 k typ.
30 to 50 typ.
18 to 38 typ.
-16 typ.
-4 typ.
-126 typ.
-70 max.
20 to 20k typ.
0.008% typ. @ 1 kHz, 20 kHz BW, Rs = 150 Ω, Output = -6 dBFS, Gain = 30 dB
24 2%
10 k 1%
0 to 20 typ.
14 typ
20 to 20k typ.
103 typ.
@ 1 kHz, 20 kHz BW, Rs = 150 Ω, Output = -6 dBFS, Gain = 0 dB
0.008% typ.
Active Summer
14 max
0 to 20 typ.
12 max.
101 typ.
20 to 20k typ.
@ 1 kHz, 20 kHz BW, Rs = 150 Ω, Output = -6 dBFS, Gain = 0 dB
0.008% typ.
dBFS Unbalanced / balanced output, green LED, peak-
reading
dBFS Unbalanced / balanced output, red LED, peak-
reading
Ω
Balanced, 1.08 k + 1.08 k
dB In 1 dB Steps
dB In 1 dB Steps
dBu -18 dBV, Balanced, Gain = 30 dB
dBu -6 dBV, Balanced, Gain = 18 dB
dBu 20 kHz BW, Rs = 150 Ω, Gain = 30 dB
dB Rs = 150 Ω, 1 kHz, Gain = 30 dB
Hz +0, -0.5 dB, at all Gain settings
V 10 mA Max, always on in Condenser Mic Mode
Ω
Balanced
dB In 1 dB Steps
Ω
1 kHz
dB +0, -0.5 dB
dB re: 0 dBFS, 20 kHz BW, A-weighted
Left ("+") and Right ("–") signals summed to mono
dBu 12 dBV
dB In 1 dB Steps
dBu 10 dBV
dB re: 0 dBFS, 20 kHz BW, A-weighted
dB +0, -0.5 dB, at all Gain settings