Rane RAD26 Guia Del Usuario página 4

Setup
Items not listed under
RAD26 Top View
The Ambient Light Sensor dims the display and LEDs in darkened rooms.
Rear Panel Inputs
2 balanced
inputs
Mic / Line /
Line-Plus
A 3-pin Line-
Plus Input
accepts a
stereo
unbalanced
source and
sums it to
mono.
3 Logic
Inputs
Push to talk,
Push to mute,
etc.
RAD26 Bottom
View
For a full block diagram, visit the RAD26 product page at rane.com.
4
Introduction > Box Contents
Audio I/O Signals RAD Status Indicators
Line Input Headphone Output
Any HAL, EXP1, or EXP3x
are sold separately.
Rear Panel Outputs
2 balanced line outputs
2 8 Ω loudspeaker outputs
3 Logic Outputs
Control another device, light,
projector, hot tub, etc.
Rear panel
RJ-45
Shielded
CAT 5e
The CAT5 distance from a HAL RAD Port to
(or better)
the RAD26 must not be more than 100 m
(325 ft). If needed, the RPI (sold separately)
can go anywhere in between to supply the
display and amplifier power.
External Amplifier
4 W
(or 1
output
@ 8 W)
4 W