Front Panel; Rear Panel - ION Audio PREMIER LP Guia De Inicio Rapido

Front Panel

8. Bluetooth Button: Press this button to start Bluetooth pairing. The LED will blink when pairing
with a Bluetooth device, and remain solid once fully paired. If after 1 minute no Bluetooth
speaker can be found to pair with, the Bluetooth transmitter will become inactive and the LED
will turn off. If currently connected to a Bluetooth speaker, press and hold this button to
disconnect from the speaker.
9. Volume/Power: This knob is used both for powering on Premier LP and adjusting the volume.
To turn Premier LP on or off, press the knob. To adjust the volume, turn the knob left and right.
10. Headphone Jack: Connect headphones (sold separately) to listen to your vinyl playback.

Rear Panel

11. USB Audio Output: Use the included USB cable to connect your turntable to your computer.
The USB connection will send audio from the turntable to your computer. Please see the
Premier LP With Your Computer
12. Aux Input: Connect a CD player, digital media player, or other audio source to this 1/8" (3.5 mm)
stereo auxiliary input. The audio from the Aux Input is also transmitted over a Bluetooth
connection.
13. RCA Output: The audio from a playing vinyl record is sent to this line-level RCA audio output.
Warning: The RCA Outputs are line-level. Please only connect these to line-level inputs. You
may damage your receiver if you plug in a line-level device into a phono-level input.
14. Power Cable Input: Use the included adapter to connect to wall power.
4
8 9
13
11
R L
USB AUX IN AUDIO OUT
12
section of this manual for information.
10
DC IN
14
PREMIER LP
Using