I.SOUND BASSONIX Guía De Usuario página 11

PC volume should be adjusted separately.
Using the FM radio (First time set up)
1. Move the power switch on the right side of the Bassonix to
the "ON" position and the speaker will say what mode it is in. If
the speaker is not in FM mode, press the mode bu on until
the speaker says "FM mode" and the screen panel shows an
FM radio station.
2. Press and hold the scan bu on on the speaker or remote for
three seconds and release for the speaker to begin the
scan/channel save function. The speaker will scan and save the
FM radio stations with the strongest equency. Once it is
complete with the scan/channel save function the FM radio
will start on channel 01.
NOTE: You must allow the speaker to scan all FM radio stations
until complete.
3. Short press the track forward or back bu on on the speaker
or remote to browse through the saved channels.
4. Long press the track forward or track back bu on on the
speaker or remote to semi-auto scan FM channels. This allows
you to go to a FM radio station that was not saved in the
scan/channel save function.
5. You can also use the remotes digital keypad to type in the FM
radio station of your choice. For example, press numbers "8", "7",
and "8" and hit the con rm bu on to go to FM radio station 87.8.
NOTE: While playing in FM mode the play/pause bu on only
serves as a mute bu on. The FM radio station will still continue
to play but will remain muted until the play/pause bu on is
pressed again.