Setup; Inserting Batteries - Crane AU5-CDSC-1 Manual Del Usario

Setup

In order to calculate your percentage of body fat, body
water, muscle mass, bone mass as well as your BMI, AMR
and BMR, the scale requires individual parameters such
as your gender, height and age. However, it is not possi-
ble to enter these parameters on the scale itself, instead
this must be done with the app or on the Crane website
(see chapter "Creating a user account").
If these individual parameters are not entered, the re-
sulting measurements may differ considerably from the
actual individual values. Thus, weight will be displayed
without user recognition if the app is not used. We rec-
ommend using the scale in combination with the app.
Setup

Inserting batteries

1. Place the scale on a soft base with the bottom facing up.
2. Open the battery compartment
3. Remove the protective foil from the enclosed
batteries 3
4. Insert the batteries in the battery compartment. The
polarity is correct if the negative poles of the batteries
are lined up with the corresponding spring contacts
in the battery compartment.
5. Close the battery compartment.
6. Turn the scale over.
The reading "0.0" will appear on the display.
.
USA
4 (see fig. B).
17