Publicidad
Idiomas disponibles
Idiomas disponibles
Advanced Settings Screen
Advanced setting parameters are preset at the factory for a typical installation. To view Advanced Settings items and/or to
change items, follow the instructions listed below.
NOTICE Advanced settings are critical to the operation of the unit. Careful consideration should be taken when working
in the Advanced Settings menu. Exercise caution when selecting and verifying parameters for the generator and region
where the generator is being operated. Confirm all settings before operating the generator for the first time.
For advanced menu items, press and hold the left arrow, right arrow, and escape key
for additional key sequence. Follow the prompts as outlined below.
NOTICE In the Advanced Setting menu, a three button access code (left arrow, right arrow, and escape key
be pressed once to enter the menu and again to change any setting. After each confirmation of a setting, the selection will
display solid for 2 seconds before moving to the next program item.
"ADVANCED SETTINGS"
WILL SCROLL
E-Governor
*ONLY APPLICABLE ON SOME MODELS
SOFTWARE
Version Displayed
32
kW
or
ok
or
Hz
or
ok
or
PHASE
or
ok
or
VOLTS
ok
or
or
*
Check
or
ok
or
kW
ok
FLASHING
or
50/60 Hz
ok
FLASHING
or
SINGLE
or
ok
THREE
FLASHING
or
VOLTS
ok
FLASHING
or
Stepper Motor
will sweep through throttle
range for dealer
visual verification
or
or
ok
or
o k
o k
ok
for 3 seconds or see pg. 29
ok
o k
o k
ok
must
Publicidad
Capítulos
