GE 040350 Manual De Instalación Y Puesta En Marcha página 38

3. Locate the MENU AND ESCAPE buttons on the control
panel A . Press and hold for 3 seconds to enter the
linking mode.
4. "LINKING MODE" will scroll across the generator
control panel.
5. Locate and hold the SYSTEM UPDATE button
the wireless monitor for 5 seconds. All 3 LEDs will flash
until the monitor links to the generator. Once it links,
the monitor will display the current state. The monitor
will try to link for 1 minute. (This step can only be
completed when the generator is in Linking Mode).
6. Once the link has been confirmed, press the OK
button on the generator control panel to exit or the
control board will turn off linking after 5 minutes. The
generator will now communicate with the wireless
monitor.
NOTICE It may take up to 1 minute for the monitor to begin
displaying the generator status correctly.
38
A
A
B on
B
menu
ok
esc
off manual
auto
generator ready
generator power
service needed
system update
DEALER NAME
DEALER PHONE