mspa Alpine El Manual Del Propietario página 19

6. Press Bubble button to dry out any water in the piping system. Operate the bubbling function for
BUBBLE
15 minutes to blow out all the remaining water. (Fig.5)
7. Use a clean towel to wipe up any remaining water and moisture on the spa tub and spa control panel.
(Fig.6)
1
4
Spa Tub Cleaning
If dirt is visible in the water or water becomes cloudy and proper water chemistry does not clear it up, change the
water and clean the spa tub.
After the spa water is drained, remove the cartridge from the inside of the spa tub wall, clean and /or replace the
filter cartridge. Use a sponge and mild soap solution to wipe away any soil or stains on the inside of the spa wall.
Rinse thoroughly before refilling with clean water.
IMPROTANT: Do not use steel wool, hard brushes or abrasive cleaners.
Spa Tub and Air Bladder(*Optional) Repair
Use the enclosed repair patch to repair any puncture:
1. Clean and dry the area to be repaired thoroughly
2. Apply the glue to the PVC patch and quickly attach it onto the damaged surface. (Glue is not included)
3. Smooth the surface to remove any air bubbles and allow it dry for 5-10 minutes
NOTE: Glue is not included.
1
2
17
garden hose
2
pin hole pin hole
5
°C
HEATER FILTER
BUBBLE TIMER
UP DOWN
19
3
6
15
minutes
3