Makita XLC02 Manual De Instrucciones página 8

► 1. Prefilter
Connect capsule. Align O symbol on capsule with O
symbol on handle and then firmly twist capsule in direc-
tion of arrow until it is secured.
1
► 1. O Mark
► 1. Handle 2. Capsule
1
1
2
NOTE:
• Always remove dust ahead of time, as suction
power will be reduced if there is too much dust
in cleaner.
• Always be sure to check that both filter and pre-
filter are loaded correctly prior to using cleaner.
If they are not loaded correctly, dust will get into
the motor housing, and cause motor failure.
If the following examples occur, filter and prefil-
ter are not loaded correctly. Reload them cor-
rectly to rectify problem.
Problem Examples
Example 1: Only prefilter has been loaded (no filter)
► 1. Prefilter
Example 2: Only filter has been loaded (no prefilter)
1
► 1. Filter
Example 3: Filter has been loaded in a peeled back state
1
► 1. Filter
8 ENGLISH
1