Following functions can be activated or inactivated:
Function
Setting
HOLD
ON or OFF
TONE
ON or OFF
LED
ON or OFF
ECO
OFF, 15, 30, 45, 60
BANKNOTE
Arrows point to the front or the rear
LANGUAGE
English, Deutsch, Francais, Italiano, Espanol
RESET
Set to factory settings
Special functions
Cleaning Message
In the event a cleaning is needed, the message CLEAN appears after switching on the device . The
frame lights up with red light . Turn not off the device for the cleaning process . Clean all sensors
by opening cover .
Low-power mode
If the device is unused, it automatically switches to Low-power Mode after 10 minutes . During this
mode only the arrows above the display are activated . After inserting a banknote to the feeder,
the Low-power mode is automatically switched off again .
Note: Use the ECO function to save even more energy .
Explanation
Banknote ejection with or without
holding on to it .
Switch on or off acoustic signals .
Switch on or off the frame light func-
tion .
The device turns off automatically after
a defined period of time without use .
(Ecomode)
Select the ejection of the detected
banknotes, false or suspect notes eject
against the selected direction .
The currently used language appears .
Press ON/OFF for several seconds to
set all functions to factory settings .
(factory settings are highlighted as
bold above)
7