Preventative Maintenance - Napa 791-3575 Manual De Instrucciones

PREVENTATIVE MAINTENANCE

This is the safety alert symbol used for the PREVENTATIVE MAINTENANCE section of this manual to alert you to
potential personal injury hazards. Obey all instructions to avoid possible injury or death.
1. Always store the kit in a well protected area where it will not be exposed to inclement weather, corrosive vapors, abrasive dust,
or any other harmful elements. The kit must be cleaned of water, snow, sand or grit before using.
2. Based on continuous engagement and disengagement of the hose from the cylinder, eventually it will become necessary to add hy-
draulic fluid to the pump's reservoir. Completely retract the ram before adding hydraulic fluid. Do not overfill in order to avoid personal
injury and hydraulic malfunction. Use only hydraulic jack oil, NAPA #765-1541 or 765-1542. Other fluids will cause damage to the
hydraulic seals.
IMPoRTANT: In order to prevent seal damage and kit failure, never use alcohol, hydraulic brake fluid or transmission oil in the pump.
3. Every kit owner is responsible for keeping the kit labels clean and readable. Use a mild soap solution to wash external surfaces
of the kit components but not any moving hydraulic components.
4. Do not attempt to make any hydraulic repairs unless you are a qualified hydraulic repair person that is familiar with this equipment.
Repairs must be performed by an authorized service center.
TROUBLESHOOTING
If repairs are necessary they must be performed in a dirt-free environment by qualified personnel who are familiar with this equipment.
Problem
1. Unit will not lift load.
2. Unit will not sustain load or feels
"spongy" under load.
3. Unit will not lift to full height.
4. Unit still does not operate.
WARRANTY
Please contact your local NAPA Auto Parts Store for details on warranty.
NoTe: Disassembly of the hydraulic components in this set by other than an authorized service center will void the war r an t y.
791-3575
OPERATING MANUAL & PARTS LIST FOR 791-3575
Action
Purge air from hydraulic system by following
procedure under SETUP.
Purge air from hydraulic system as above.
Purge air from hydraulic system as above.
For a complete list of authorized
hydraulic repair centers please visit www.
toolwarrantyrepair.com.
4
ViDeo
09/28/11