Polaroid INSTA-SHARE Moto Mod Manual Del Usario página 2

Charge your Insta-Share Printer
Note: the fastest way to charge your Moto Mod is to plug the charger into your Insta-
Share Printer.
To charge, connect your Insta-Share Printer to a power outlet with a USB-C cable.
Alternatively, charge your device by attaching it to your phone and charging your phone.
Note: fully charge your Moto Mod using the charger that came with your phone.
Using other chargers with a USB-C connector is not recommended and can slow
charge speed. Avoid incompatible USB-B (micro USB) chargers and uncertified
adapters and cables, as they may damage your device.
Charge levels
Press the battery check button to check the charge level. The LEDs indicate the charge level.
LEDs
4
3
2
1
Note: your Insta-Share Printer must be charged at least 20% (or 2 LED lights) in order to print.
Charge %
75 to 100
50 to 74
25 to 49
0 to 24
Battery check
button