Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
VIP™ Driver QRG
Product
Description
AC Power
AC Plug
Powering up the
VIP™ Driver
Video
Input/Output
Front Panel View
The VIP™ Driver is required to operate the CHAUVET® MVP™/PVP™
Video Wall System. This Driver provides the interface between any DVI/HDMI
video source and all MVP™/PVP™ video system components via the included
LED Studio software application.
The front panel enables manual control of the video wall brightness, providing
three levels of brightness variations.
This product has an auto-ranging power supply that can work with an input
voltage range of 100 to 240 VAC, 50/60 Hz.
Connection
AC Live
AC Neutral
AC Ground
Connect this product to power. Once plugged in, push the Power Switch on the
back panel to ON.
Video Source
(Input)
DVI-I or HDMI
The maximum length of the Neutrik® etherCON® signal cable from the
VIP™ Driver to the first video panel or to the VIP™ Signal Distributor is
not to exceed 100 meters.
Range
1–16
1–32
1–64
Wire (U.S.)
Wire (Europe)
Black
White
Green/Yellow
Display Refresh
Video Output
Neutrik®
etherCON® (2)
Brightness
Control
3
Brown
Blue
Green/Yellow
Video Refresh
Rate
2,000 Hz
(flicker-free)
Description
Provides 16 brightness variations
Provides 32 brightness variations
Provides 64 brightness variations
EN
Screw Color
Yellow/Brass
Silver
Green
Rate
60 Hz
Publicidad
Tabla de contenido
