Converting To Lp Gas; Tools Required; Convert The Pressure Regulator - GE JGP18 Guía De Uso, Cuidado E Instalación

HOW TO CONVERT FOR USE WITH LP GAS
OR NATURAL GAS
This cooktop leaves the factory set for use with
natural gas. If you convert to LP gas, keep these
instructions and orifices in case you want to convert
back to natural gas.
The conversion should be done by a qualified
technician or installer.

TOOLS REQUIRED:

1/2" open-end wrench
Flat blade screwdriver (small)
Nut drivers: 5/16" or a small adjustable
(depending on the size of the spuds)
1
PREPARE COOKTOP FOR CONVERSION
(1) Turn off gas supply at the wall.
(2) Turn off the electrical power to the cooktop.

CONVERTING TO LP GAS

or Converting Back to Natural Gas from LP
2

CONVERT THE PRESSURE REGULATOR

WARNING: Do not remove the pressure
regulator.
1. Use an adjustable wrench to remove the cap
from the pressure regulator.
LP
Converter
cap and pin
NAT
2. Apply sideward finger pressure to remove the
plastic pin from the metal cap.
NAT
3. Push down on the disc edges to replace the
pin in the cap.
LP
HINT: To turn the pin over, place the cap on
a flat surface and press the pin sideways with
your fingers.
Pressure Regulator
Wiring Box Cover
(continued next page)
27