Dmx Values - Chauvet Professional Amhaze II Guía De Referencia Rápida

Amhaze™ II QRG
Preparing for
Operation

DMX Values

Channel
2-
Channel
Mode
To prepare the Amhaze™ II for operation:
1. Open the flight case.
2. Pull out the fluid tank and remove the cap.
3. Verify that the two plastic hoses attached to the cap are in
place and in good condition.
4. Pour CHAUVET® (PHF or HFG) haze fluid inside the tank,
and re-cap.
5. Reinsert the tank.
6. Make sure that the plastic hose that goes from the cap to
the hazer is not bent.
7. To direct the haze up or down, pull the haze guide from the
front panel and install it in the desired position.
8. Plug in power and wait approx. 2 min. for warm-up to
complete.
Only use CHAUVET® approved (PHF or HFG) haze fluid.
Otherwise, you might not have satisfactory results. In addition,
unapproved fluid can damage the Amhaze™ II or cause harm to
humans or animals.
Function
1 Fan Volume
Output
2
Volume
Value
000 ó 005
No output
006 ó 255
20–100%
000 ó 005
No output
006 ó 255
2–100%
4
Percent/Setting
EN