Resetting The Breaker; Dmx Linking; Control Panel Description - Chauvet Professional Amhaze II Guía De Referencia Rápida

EN
AC Power
AC Plug
Resetting the
Breaker

DMX Linking

DMX Connection
Control Panel
Description
This product comes in two models, each with a fixed-input voltage
power supply, either 120 V, 60 Hz or 230 V, 50 Hz. Be sure you
have the correct model for the line voltage in your area.
Connection
AC Live
AC Neutral
AC Ground
This product is equipped with a resettable circuit breaker. If the
breaker trips, all sections of this product will lose power.
1. Remove the power cord from mains power.
2. Allow unit to cool for 15 minutes.
3. After 15 minutes, you may attempt to reset the breaker by
pressing the button with your finger.
4. Plug the product's power cord into the power outlet and
continue using as recommended.
The Amhaze™ II is compatible with a DMX controller using a regular
DMX serial connection. A DMX Primer is available from
www.chauvetpro.com.
The Amhaze™ II uses a regular DMX data connection. See the user
manual to connect and configure for DMX operation.
Button
<FUNCTION> Enters the programming mode
Controls the haze pump to modify the output
<VOLUME>
volume
<TIMER>
Starts the timer controlled operation
Allows momentary fog output for as long as the
<MANUAL>
button is held down.
Navigates upward through the menu list and
<UP>
increases the numeric value when in a function
Navigates downward through the menu list and
<DOWN>
decreases the numeric value when in a function
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
3
Amhaze™ II QRG
Screw Color
Brown Yellow/Brass
Blue
Function
Silver
Green