W Box Technologies WBXRA040E Manual De Instrucciones página 11

The settings available in this menu include:
•
Video Output Interface: Designates the output to configure the settings for. Outputs include HDMI/VGA and CVBS
(depends on the model).
•
Live View Mode: Designates the display mode to be used for Live View.
•
Dwell Time: The time in seconds to dwell between switching of channels when enabling auto-switch in Live View.
•
Enable Audio Output: Enables/disables audio output for the selected camera in the live view mode.
•
Event Output: Designates the output to show event video; if available, you can select a different video output
interface from the Video Output Interface when an event occurs.
•
Full Screen Monitoring Dwell Time: The time in seconds to show alarm event screen.
2. Set the camera order.
1) Select View tab.
2) Select an output interface and select a screen layout.
3) Click to select a screen in the right region and double-click to select a channel in the left region. Thus the
selected channel will be displayed in the corresponding screen.
Note:
4) You can click
go to the previous or next page.
Click the Apply button.
5)
means the channel will not be displayed.
to start live view of all channels and click to stop live view of all channels. Click
11
or to