•
For the installation of an outdoor unit, refer to the installation manual attached to the outdoor unit.
•
When using the wireless remote controller, refer to the installation manual attached to the wireless re-
mote controller.
•
Do not install or operate the unit in rooms mentioned below.
•
Laden with mineral oil, or fi lled with oil vapor or spray like in kitchens. (Plastic parts may deterio-
rate which could eventually cause the unit to fall out of place, or could lead to leaks.)
•
Where corrosive gas like sulfurous gas exists. (Copper tubing and brazed spots may corrode
which could eventually lead to refrigerant leaks.)
•
Where machines can generate electromagnetic waves. (Control system may malfunction.)
•
Where the air contains high levels of salt such as that near the ocean and where voltage fl uctu-
ates greatly such as that in factories.
Also in vehicles or vessels.
•
This unit, both indoor and outdoor, is suitable for installation in a commercial and light industrial environment.
If installed as a household appliance it could cause electromagnetic interference.
WARNING
•
Entrust installation to the place of purchase or an authorized serviceman. Improper installation could lead
to leaks and, in worse cases, electric shock of fi re.
•
Use of unspecifi ed parts could lead to the unit falling, leaks and, in worse cases, electric shock or fi re.
NOTE
•
Be sure to read this manual before installing the indoor unit.
2-1
ACCESSORIES
Check the following accessories are included with your unit.
(1) Installation
Name
panel
Quantity
1 set
Shape
Name
(5) Clamp
Quantity
1 large 4 small
Shape
2-2
OPTIONAL ACCESSORIES
Remote controller type
Wired type
Wireless type
English
(2) Attachment screws
for the installation panel
9 pcs. → FAQ18, 24 type
M4 × 25L
(6) Securing screws
2 pcs.
M4 × 12L
Model
BRC1C71
BRC7E818
(3) Paper pattern
for installation
1 pc.
(7) Insulating tube
1 long 1 short
(Other)
•
Operation manual
•
Installation manual
(4) Insulating tape
1 pc.
4