Self Clean - Samsung WF42H5000A Serie Manual Del Usuario

Ocultar thumbs Ver también para WF42H5000A Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SELF CLEAN+

Self Clean+ is a self-cleaning cycle that removes mold that may occur inside the washing machine.
1. Press the Power button.
2. Press the Self Clean+ button.
3. Press the Start/Pause button.
Using Self Clean+, you can clean the drum, tub and diaphragm without using a cleansing
agent.
CAUTION
Never use Self Clean+ when laundry is in the washing machine. It may cause damage to the
laundry or a problem with the washing machine.
cleansing agent recommended by the cleansing agent manufacturer. (When using a
powder-type cleansing agent , remove the liquid detergent
compartment.)
The Self Clean+ Auto Indicator Function
that tub (drum) cleaning is required. In this case, remove
the laundry from the washing machine, turn the power on,
and clean the drum by running Self Clean.
"Self Clean+" indicator turns off after one hour. However,
the "Self Clean+" indicator will light again after five
washes. Not running Self Clean+ at this point will not cause
a problem with the washing machine.
differ depending on the number of times the washing machine is used.
BETTER_WF42H5000-03397A-14_EN.indd 31
function that can be set is Delay End.
Clean+ begins.
Self Clean+" button is lit after a wash, it indicates
English _31
(
2018/8/14 11:37:53

Publicidad

Tabla de contenido
loading

Tabla de contenido