Pump Unit Support; Interior Bench - Waterflex Fit’s Pool WX-FITSPOOL/2017 Guía De Instalación Y Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

6.3. Pump unit support assembly
20
Step 1
Connect one of the two pre-as-
sembled side panels to the
support panel using the eight
screws provided. Do not over
tighten the screws.
6.4. Interior bench assembly
32
Step 1
Screw the three planks on the
metal frame using the six wood
screws provided. The planks
must protrude equally from each
side of the frame.
6. INSTALLATIoN
C
M
J
CM
MJ
CJ
CMJ
N
21
Step 2
In the same manner, connect
the second pre-assembled side
panel to the support panel.
35
33
Step 2
Screw the first side panel the
frame. The planks must rest on
the side panel. Screw the rein-
forcement bar.
20
Step 3
Connect the four horizontal
planks to the side panels with
the remaining 16 screws.
33
34
Step 3
Screw the second side panel to
the frame and the reinforcement
bar.
22
35
35

Publicidad

Tabla de contenido
loading

Tabla de contenido