After Use/Storage; After-Sales Service And Application Service - Bosch Professional GRA 53 Manual Original

OBJ_DOKU-42365-002.fm Page 17 Monday, February 9, 2015 9:42 AM
Problem Possible Cause
Excessive vibra- Blade nut/bolt loose
tions/noise
Cutting blade damaged
Land drive fails to Grass too high
operate
Ground conditions too soft
Low battery capacity
Isolator key off
Poor battery contact
Batteries too hot/cold
Motor protector has activated
If you are unable to resolve the problem using the Troubleshooting guide then please contact your dealer in the first instance.

After use/Storage

Correct storage is essential for maintaining the life of the
product. If possible, avoid storage areas with high humidity
which could cause rust or corrosion.
End of season storage: Remove batteries and store both ma-
chine and batteries in a dry safe place away from direct sun-
light.
Do not place objects on top of the machine.
When storing for extended periods, thoroughly clean the
product beforehand.
After-sales Service and Application
Service
www.bosch-professional.com
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the garden product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Bosch Power Tools
Corrective Action
Tighten blade bolt to 30 Nm ensuring that washer is present (always
wear protective gloves)
Replace the blade
Increase height of cut or provide manual assistance
Provide manual assistance
Check the charge remaining in the batteries – shown on the battery
display
Check that the isolator switch is in the "1" position
Ensure that batteries are fully inserted
Allow batteries to warm up/cool down – check battery display
Allow motor/electronics to cool for 5 minutes and increase height of
cut
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: (021) 5512577
Fax: (021) 5513223
E-Mail: bsc@zsd.co.za
English | 17
F 016 L70 940 | (9.2.15)