Setting The Print Head Gap - MPI Tally Dascom T2265+ Guia De Instalacion

Settings
FormAdj= 17/72"
Online
Set < > Exit
1 2 3 4
Setup
➤
The printer features automatic print head gap adjustment to the thickness of the paper used. In
Setting the print
setup mode, you can enter a correction value to modify the head gap that is normally determined
head gap
automatically. This correction is useful for modifying the appearance of the type face and the
impact force for multi-layer paper.
The AGA (automatic gap adjustment) function must be set to On. For more detailed informa-
tion, refer to the User Guide on the Online CD-ROM.
Adjust Paperway
Online
Menu Char
1 2 3 4
Setup
TOF
Online
Head Tear
1 2 3 4
Setup
Head= 0 *
Online
Set < > Exit
1 2 3 4
Setup
Negative values decrease the print head gap, positive values increase it.
The setting made will be retained after switching off the printer.
Mantenimiento Periféricos Informaticos C/Canteras, 15 28860 Paracauellos de Jarama (Madrid) Tel: 00 34 917481604 Web: https://mpi.com.es/
24
Confirm the input by pressing the Set (1) key.
Press the Setup key. The printer returns to the initial status.
The setting made will be retained after switching off the printer.
For more details, please refer to the User Guide on the Online
CD-ROM.
Press the Setup key. The printer changes to setup mode.
Press the Adjust (2) key.
Press the Head (1) key.
Use the < (2) or > (3) key to set the range within which the automatic gap
adjustment is to be corrected. You can select values in the range from -10 to +10.
Confirm the input by pressing the Set (1) key.
Press the Setup key. The printer returns to the initial status.
Quick start guide