Assembly - Glomex DISCOVERY S460S Manual De Instrucciones

DISCOVERY S460S
EXPLORER S460M
6.

ASSEMBLY

S
DANGER
While installing the antenna, wear the appropriate
safety equipment for the job to be carried out.
Operations to be carried out outside the vehicle.
1. First of all, make sure you have chosen a cor-
rect position to install the antenna (see section
5: "Installation").
2. Remove the antenna from the packaging box.
3. Carefully clean the 4 mounting plates (P) on the
antenna and the vehicle roof with alcohol and
let evaporate before applying the sealant (Fig.
6).
4. Apply some sealant like SIKAFLEX®252 or
similar onto the plates (Fig. 7).
5. Place the antenna in the appropriate position
on the vehicle middle line, respecting the instal-
lation direction indicated in Fig. 8 and apply a
good pressure on the radome sides to make the
plates correctly adhere to the mounting surface.
Wait for the silicone to solidify (time varies
according to outer temperature).
6. OPTIONAL OPERATION: drill the plates with
an 8 mm drill tip and fasten the antenna to the
roof with the appropriate through screws (Fig.
9).
P
P
Fig. 6
P
P
48
Fig. 7
Fig. 8
Fig. 9
www.glomexmobile.com