Glomex DISCOVERY S460S Manual De Instrucciones página 70

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

DISCOVERY S460S
EXPLORER S460M
4. No image on the TV (the led
on the control unit is green)
5. Intermittent images for short
periods
6. The equipment does not find
the satellite (the led on the
control unit is red)
- the receiver is off
- the TV set is off or has not
been tuned to AV
- wrong cable connection on the
receiver
- the channel list is not up-to-
date
- the selected satellite is not the
correct one
- the
satellite
signals
obstructed by trees, buildings,
overpasses, mountains
- the vehicle is at the boundary
of the coverage area
- bad weather conditions
- wrong SKEW adjustment
- temperature
change
S460M models)
- it is necessary to calibrate the
sensors again (for S460M
models)
- the
satellite
signals
obstructed by trees, buildings,
overpasses,
mountains
attachments installed on the
vehicle roof
- the vehicle is outside the sig-
nal coverage area
- the vehicle is moving during
the first 60 seconds after start-
ing the equipment (for S460M
models)
- bad weather conditions
- wrong SKEW adjustment
- inner failure
68
- turn off the control unit, turn on
the receiver and then turn on
the control unit again
- turn on the TV set and tune to
AV channel
- check that the SCART socket
between the TV set and the
receiver is installed correctly
- carry out the automatic chan-
nel search in the receiver
menu
- check the selected satellite
are
- move the vehicle to allow an
unobstructed
view
antenna
- go back within the coverage
area; refer to the footprints of
the coverage areas on page
62 in this manual
- adjust the SKEW by following
the instructions on page 55
(for
- turn off and on again the
antenna
- turn off and on again the
antenna
are
- move the vehicle to allow an
unobstructed
view
or
antenna or correctly position
the antenna on the vehicle roof
- go back within the coverage
area; refer to the footprints of
the coverage areas on page
62 in this manual
- turn off the equipment for
10 seconds, turn it on again
and make sure that the vehicle
is still or moves in a straight
line during the first 60 seconds
after being started
- adjust the SKEW by following
the instructions on page 55
- contact the Service Centre
www.glomexmobile.com
for
the
for
the

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Explorer s460m

Tabla de contenido