Peavey PV35XO Manual De Instrucciones página 13

10 12 14 16
8 9
11
13 15
LOW-MID GAIN CONTROL (8)
This controls the output level of the low-mid frequency signal (signal above the selected low/low-mid crossover
point and below the selected low-mid/mid crossover point) present at low-mid output XLR.
HIGH GAIN CONTROL (Channel 1) (9)
This function is non-operational in MONO mode.
OUTPUT MUTE SWITCHES (Channel 1) (10)
This mutes the output of the associated level controls for lows and low-mids signals.The Mute function will be
indicated by the illumination of the red LED located above the associated switch.
MODE SWITCH (11)
This switch selects between stereo 3-way operation and mono 5-way operation.The red LED above Mode switch
indicates mono mode.When the switch is engaged, the crossover is in mono operation.
SUBS OUT SUMMED SWITCH (12)
This function is non-operational in MONO mode.
INPUT GAIN CONTROL (Channel 2) (13)
This function is non-operational in MONO mode.
CLIP INDICATOR (Channel 2) (14)
This function is non-operational in MONO mode.
CROSSOVER SELECTOR CONTROL (mids/high-mids) (15)
This allows users to choose their desired crossover points for the high side of the mids and the low side of the
high-mids.The control range is between 80 Hz and 900 Hz or 800 Hz and 9 kHz, depending on the position of the
Range switch.
RANGE (x10) SWITCH (mids/high-mids) (16)
This switch multiplies the value indicated on the Crossover Selector control for the high side of the mids and the
low side of the high-mids times 10.When engaged, the range will change from 80 Hz - 900 Hz to 800 Hz - 9 kHz.
Range x10 is indicated by the illumination of the red LED above the switch.
13