Emerson Warm Tiles ES Manual Del Usuario página 55

10.4.4 Sensor Type 2/2
7 7
7 8 9
PAGE 55
All Rights Reserved. Used under license by EasyHeat Inc.
7. Use the "Arrow Right" or "Arrow Left" button to toggle through the
temperatures for which resistance must be set.
Then, repeat steps 6-7 until all four resistance values have been set.
8. When all four values are set, tap the "Arrow Right" button.
9. A warning screen will be displayed. Tap the "Accept" button to confirm the use
of an alternative sensor.
The thermostat will automatically return to "Installer Settings".
<
Contents
>