Storage; Cleaning And Maintenance; Safety Information; Cleaning - CASO DESIGN VC300 Pro Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 90

17.10 Storage

Store the unit in its upright position, out of the reach of children.
► Always unplug the appliance from its outlet immediately after using and before

cleaning.

► For the correct storage, please slightly close the cover, do not lock, it will deform the
gaskets and affect the machine function.

18 Cleaning and Maintenance

This chapter provides important information on properly cleaning and maintaining your
vacuum sealer.

18.1 Safety information

ATTENTION
Please observe the following safety notices, before cleaning the unit to avoid
damage to the unit or personal injury:
► To ensure optimum performance, the device must be cleaned regularly. Failure to
clean the unit regularly can lead to potential malfunctions, as well as safety and health
risks.
► Unplug the device prior to cleaning it.
► The sealing bar remains hot after use. Wait a few minutes until the strip has cooled
before cleaning.
► Clean the device after use as soon as it has cooled down. Extended waiting
unnecessarily complicates cleaning and can make it impossible in extreme cases.
Excessive accumulations of dirt can even damage the device under certain
circumstances.
► Never immerse the device in water or other liquids and do not place in the dishwasher.
► If moisture penetrates the unit's housing, it can damage the electronic components.
Please ensure that no moisture enters the device.
► Do not use any harsh or abrasive cleaning agents.
► Do not attempt to scrape off stubborn grime with hard or abrasive tools.
► Dry all parts thoroughly before using after cleaning.
► Do not immerse the unit in water or other liquid.
18.2 Cleaning
Outside of the unit
Wipe with a damp cloth or sponge and mild dish soap.
Inside of the unit
Wipe away any food or liquids with a paper towel.
PLEASE NOTE
46

Publicidad

Tabla de contenido
loading

Tabla de contenido