Anexo A Advertencias; English - General Electric Automuestreador GE Guia De Instalacion

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

English

This symbol on the instrument indicates that the user should refer to
the manual for operating instructions.
This symbol indicates the protective earth terminal (ground) for the
product.
For continued protection against fire hazard, replace fuse with same
type and rating.
This is a Safety Class I product. It must be wired to a mains supply
with a protective earthing ground incorporated into the power cord.
Any interruption of the protective conductor, inside or outside the
equipment, is likely to make the instrument dangerous. Intentional
interruption is prohibited.
Always stop TOC measurements/protocols before turning off or
unplugging the GE Autosampler.
To protect against damaging the membrane in the Analyzer, ALWAYS
avoid using the syringe on the needle assembly while it is still
attached to the Autosampler.
ALWAYS turn the screw to the GE Autosampler arm counterclockwise,
as reversing the screw direction can damage the z-axis needle
movement.
Automuestreador GE
DIG 77000-01 ES Rev. B
Anexo A: ADVERTENCIAS
W
ARNINGS
53 / 67
A
GE Analytical Instruments © 2014
Guía de Instalación