Français - General Electric Automuestreador GE Guia De Instalacion

Anexo A
Observe the following guidelines when using the GE Autosampler in
conjunction with flammable liquids: To reduce the risk of fire, the
GE Autosampler shall not be used to sample flammable liquids.
GE Autosampler should have no parts in contact with the surface of
the fluid or near the surface of the fluid that consume power, produce
heat, or conduct heat from other areas in any form. Ensure that no
parts, in or near the fluid surface are capable of igniting a flammable
liquid.
Keep clear of the probe arm during operation. Although it is designed
to stop upon detecting an obstruction, the probe arm can move
without warning during normal operation and at start-up.
The sample needle is sharp. Avoid contacting the needle assembly
during analysis, and use caution when handling the needle assembly
when the needle is at rest.
This symbol indicates a pinch point area on the product. Avoid
contacting the needle assembly prior to or during movement of the
needle.
This symbol indicates the European Union Directive 2002/96/EC for
waste electrical and electronic equipment (WEEE) requires disposing
the Analyzer separately from waste.
Français
Ce symbole sur l'appareil signifie que l'utilisateur doit consulter le
manuel pour des instructions quant au fonctionnement.
Ce symbole indique la borne de terre de protection (terre) pour le
produit.
Pour une protection constante contre les risques d'incendie,
remplacer le fusible avec le même type et la même résistance.
Automuestreador GE
DIG 77000-01 ES Rev. B
W
ARNINGS
A
VERTISSEMENT
54 / 67 Guía de Instalación
GE Analytical Instruments © 2014