Alpine PKG-RSE3HDMI Manual De Instalación página 3

Accessories
Check accessory parts.
AV Input Connector AV Output Connector
RUE-4159H Universal SHS-N106 Single
Remote Control Source Fold -Flat
Wireless Headphones
MONITOR DEVICE
MUTE
SOURCE
DVD USB
HDMI1 HDMI2 AUX
MONITOR
DVD.CMD PIC.M
DVD-HU EXT-DVD DTV
EPG SETUP
TOP.M MENU
ENTER
DISP RETURN
INFO
EXIT
REPEAT CH CH SCAN
AUDIO SUB.T ANGLE
TEXT BACK
1 2 3 4
5 6 7 8
9 0 +10 CLR
RUE-4159H
Trim Ring Screws (for
Installation Bracket)
AAA Batteries Optional FM
Switching Box
Sold
Separately
Part No.
TMXR2000FMSB
X 6
TMX-R3300HDMI Overhead
Monitor
Top Right side
interchangeable interchangeable
cover cover
X 3 X 3
(Color of Interchangeable cover: high gloss gun metal black, high
gloss bright gray, high gloss champagne gold)
Power Connector
Installation Bracket
X 2
Screws (for Trim Ring)
X 4 X 5
Quick Start HDMI/USB
Guide,
Cover Plate
Installation
Manual,
Registration
Card
FM Transmitter Optional
Antenna Wire KCU-315UH
HDMI/USB
Extension
Connector
Sold
Separately
Left side Rear
interchangeable interchangeable
cover cover
X 3 X 3
Installing the Overhead Monitor
1
Install the metal installation bracket to the ceiling.
4 screws will be used to attach the bracket to the ceiling.
The protruding screw holes should be facing down, away
from the ceiling. Ensure that the bracket is affixed to the roof
supports behind the headliner and exercise caution to avoid
drilling into the roof of the vehicle.
2
Install the top interchangeable color cover.
Open the monitor lid.
Attach the cover to the monitor from the front (side facing
the panel open button).
Push the sides of the cover into place.
Close the monitor lid and push the back of the cover into
place.
3
Install both side panels of the interchangeable
color covers.
Align and insert the notches on the panels into the grooves
on the monitor body.
Slide the cover in the direction towards the front control keys
at the front of the unit and snap the notch into place. A click
should be heard.
Front
Protruding
screw
holes.
3
-EN