Heathrow Scientific Mini Vortexer Manual De Instrucciones página 3

18. Always work in a manner which endangers neither the user nor any
other person.
19. If unit is malfunctioning or needs to be returned, please contact
either the authorized dealer or Heathrow Scientific LLC.
20. Only use original manufactorer's flexible vortexing cover or AC
adapter.
21. Improper use of equipment will void the warranty.
22. Any attempt to disassemble unit will void warranty.
23. Store at room temperature in a dry area. Do not expose to sunlight,
moisture, or extreme temperatures for prolonged periods of time.
Positioning For Disconnect
Plug the power adapter cord into the rear of the unit and the power cord
into an approved outlet. Make sure that the power cord connector can be
readily grasped at the rear of the device so that it can be removed to
easily disconnect it from the Mini Vortexer.
Cleaning
1. Unplug unit. Wipe with cloth dampened with water and use with mild
soap if needed.
2. Before using any cleaning or decontamination methods except those
recommended in this manual; please contact Heathrow Scientific
LLC to ensure that the proposed method will not damage the device.
See maintenance section for more on cleaning.
Warning!
• If the unit is not used as recommended by the manufacturer the overall
safety will be impaired
• Check MSDS, wear required Personal Protective Equipment, and
observe all applicable local and national regulations before dispensing
and disposing of hazardous samples.
• The laboratory procedure should ensure that no person or hazardous
substances are present within a 12" (30cm) zone around the
instrument when operating.
®
3