Packaging Contents - Heathrow Scientific Mini Vortexer Manual De Instrucciones

Packaging Contents

1. Mini Vortexer
2. Power Adapter with 4 plugs
(North America, Japan, EU, UK, and Australia)
3. 2 Flexible Vortexer Caps
Operation
1. Remove the contents from the package, examining them carefully for
breakage, defects, or missing parts. Save the packaging.
2. If necessary see package insert for assembly instructions.
3. Place Mini Vortexer on a sturdy, stable, level surface near a grounded
electrical outlet away from the edge of the counter and other moving
equipment. The surface should be clean. Ensure that no person or
hazardous substances are present within a 12" (30cm) zone around
the instrument when operating. Make sure the power cord is clear of
hot surfaces and other hazards.
4. Carefully fill container with fluids to no more than 75% of container's
total volume. Note the level of the liquid which will rise to
accommodate the spinning vortex of fluid when unit is powered. Be
sure to leave sufficient room at the container top for this rise in fluid
level.
5. Secure the container lid to the tube being used.
6. Place bottom cone of the tube into the cone-shaped pocket on top
of the vortex unit.
7. Firmly hold only the top of the tube by the lid or cap and press
down just hard enough to activate the orbital vortex action, pressing
harder than necessary will only decrease the efficiency of the
vortexing action.
8. Hold down tube as long as necessary to blend the mixture.
Warning!
Use only the power adapter delivered with the product. Use of other
power adapters will void warranty.
Warning!
Do not use if cord or power supply is damaged.
6