Information On Minima Series Gas Hobs; Laws, Regulations And Technical Directives; Place Of Installation; Positioning - Gastec MINIMA Serie Manual De Instrucciones

Before proceeding with the installation, remove the protective plastic film and eliminate any adhesive residues by means of
a suitable product for cleaning stainless steel.
Install the oven horizontally, correct positioning is obtained by turning the levelling feet.
If the unit is installed on its own, it is advisable to secure it to make its stability safer.
2.1

INFORMATION ON MINIMA SERIES GAS HOBS

This booklet is applicable to our hobs in the Minima series type A Category II (Natural Gas and L.P.G.).
See table 1.1 and 2.5. The plate according to EN437 and EN 203 standards part 1 is on the back and inside.
Example of Italian data plate: Cat. II 2H3+
Pe = Incoming pressure
Pi = Nozzle pressure
2.2

LAWS, REGULATIONS AND TECHNICAL DIRECTIVES

The following regulations must be observed during installation:
- Current accident and fire regulations.
- The regulations of the gas supply company, which has to issue an authorization before installation.
- "Gas system installation" standards.
- Electric system installation" standards.
- The regulations of the electric power supply company.
- Health regulations.
2.3

PLACE OF INSTALLATION

- The unit should be installed in a room with adequate ventilation. This unit needs a draw of at least 2 m
(Thermal Capacity).
- Install the unit in compliance with the safety regulations UNI - CIG 8723, Italian Law No. 46 dated 5-3-'90 and Ministerial
Decree D.M. No. 74 dtd 12.04.96
2.4

POSITIONING

- The various units may be installed separately or combined with other units in the same range.
- This unit is not suitable for encasing.
- The distance from the side walls must be at least 10 cm.; should the distance be less or the material of the walls or floor be
flammable, it is vital to install heat insulation.
GB
V
IT-GR-GB-ES-IE PT
II2H3+ II2H3+
Cat.
P n 20,29/37 20,29/37
LU IS-DK-FI-SE
Cat. II2E3P II2H3B/P
P n 20,37,50 20,29
G20
Qn
kW
(Hi)
G25
- 18 -
Mod.
Matr.N°
Hz kW
FR-BE NL
II2E+3+ II2L3P
20/25,29/37 25,30,50
AT-CH DE
II2H3B/P II2ELL3B/P
20,50 20,20,50
3
m /h G30
3
m /h G31
Type
tipo
mbar
mbar
NO
I3P
30
Kg/h
Kg/h
3
/h • kW T.C.