Steamfast SF-294 Guia Del Usuario página 5

Assembling Your
3-in-1 Steam Mop
STEAM CLEANER SETUP
JET NOZZLE
CAUTION: Always allow unit to cool before connecting/disconnecting any accessories.
1. Align Jet Nozzle with Steam Nozzle as shown (FIGURE 4).
2. Slide Jet Nozzle into Steam Nozzle, pressing firmly until release button snaps through hole.
3. To remove Jet Nozzle, press firmly on release button while simultaneously pulling Jet Nozzle
away from Steam Nozzle.
JET STEAM
NOZZLE NOZZLE
RELEASE HOLE
BUTTON
UTILITY BRUSHES
CAUTION: Metal tip of Jet Nozzle becomes hot during use. Always allow unit to cool
before connecting/disconnecting any accessories.
1. Align Utility Brush with tip of Jet Nozzle as shown (FIGURE 5-A), and press it firmly on as far
as it will go. Screw Utility Brush onto Jet Nozzle as shown, until secured tightly in place
(FIGURE 5-B).
A
8 | ENGLISH
FIGURE 4
B
FIGURE 5
SQUEEGEE
CAUTION: Always allow unit to cool before connecting/disconnecting any accessories.
1. Align Squeegee with Fabric Nozzle as shown (FIGURE 6-A).
2. Insert tab on Squeegee into slot on face of Fabric Nozzle (FIGURE 6-B). Press in until secure.
3. To remove Squeegee, simply pull it off of Fabric Nozzle. It does not need to be released or
otherwise unlocked.
A
FABRIC STEAMER SETUP
FABRIC NOZZLE
CAUTION: Always allow unit to cool before connecting/disconnecting any accessories.
1. Align Fabric Nozzle with Steam Nozzle as shown (FIGURE 7).
2. Slide Fabric Nozzle into Steam Nozzle, pressing firmly until release button snaps through hole.
3. To remove Fabric Nozzle, press firmly on release button while simultaneously pulling Fabric
Nozzle away from Steam Nozzle.
FABRIC STEAM
NOZZLE NOZZLE
RELEASE HOLE
BUTTON
B
FIGURE 6
FIGURE 7
ENGLISH | 9