Accessories; Machine Storage; Service And Repair; Disposal - RIDGID SuperFreeze SF-2300 Manual De Instrucciones

SuperFreezer

Accessories

WARNING
To reduce the risk of serious injury, only use acces-
sories specifically designed and recommended for
use with the SuperFreeze Pipe Freezing Units such
as those listed below. Other Accessories suitable
for use with other tools may be hazardous when
used with the Pipe Freezing Units.
Catalog No. Description
For SF-2500:
69712 SF-2500R
70652 SF-2500R 1
69717 SF-2500R 2" CTS Bushings (set of 2)
68857 SF-2500R
68862 SF-2500R
68837 SF-2500R 22 mm End Adapters (set of 2)
72427 SF-2500R 28 mm End Adapters (set of 2)
72422 Set of 2 End Adapters
66986 Set of 2 End Adapters 12 mm to 16 mm
65976 Set of 2 End Adapters
1 / " Fe (22 mm)
2
For SF-2300:
42838 12mm Bushings (set of 2)
42853 15mm Bushings (set of 2)
42843 22mm Bushings (set of 2)
42833 35mm Bushings (set of 2)
For SF-2500 and SF-2300:
65942 Quick Grip Clamp
69707 Velcro Straps (set of 2)
74946 RIDGID Freeze Gel
60776 Spray Bottle, 8 oz. (0.25 liter)
Further information on accessories specific to the tool
can be found in the RIDGID Catalog and online at
www.RIDGID.com or www.RIDGID.eu.

Machine Storage

The RIDGID SuperFreeze Pipe Freezing Units must be
stored in a dry secure, locked area, out of the reach of chil-
dren and people unfamiliar with the Units.
Wipe frost/water from the fully thawed freeze heads and
lines. Coil the hose in the adjacent compartment. Do not
cross the hoses. The aluminum freeze heads should be
protected from impact, sharp objects and rough han-
dling.
Do not store the pipe freezing unit in a vehi-
NOTICE
cle. Excessive vibration and shock can damage the
unit. Firmly secure the unit when transporting.
10
® Pipe Freezing Units
3 / " CTS Bushings (set of 2)
4
1 / " CTS Bushings (set of 2)
4
1 / " End Adapters (set of 2)
2
3 / " CTS End Adapters (set of 2)
4
3 / " Fe (28 mm)
4
/ " Fe (18 mm),
3
8

Service and Repair

WARNING
Improper service or repair can make the SuperFreeze
Pipe Freezing Units unsafe to operate.
RIDGID SuperFreeze Pipe Freezing units contain refrig-
erant which requires certified service people. Service
and repair of the SuperFreeze Pipe Freezing Units must
be performed by a RIDGID Independent Authorized
Service Center.
For information on your nearest RIDGID
Service Center or any service or repair questions:
• Contact your local RIDGID distributor.
• Visit www.RIDGID.com or www.RIDGID.eu to find
your local RIDGID contact point.
• Contact Ridge Tool Technical Service Department at
rtctechservices@emerson.com or in the U.S. and
Canada call (800) 519-3456

Disposal

Parts of the RIDGID SuperFreeze Pipe Freezing Units
contain valuable materials and can be recycled. There are
companies that specialize in recycling that may be found
locally. Dispose of the components in compliance with all
applicable regulations. Contact your local waste man-
agement authority for more information.
For EC Countries: Do not dispose of elec-
trical equipment with household waste!
According to the European Guideline 2002/ -
96/ EC for Waste Electrical and Electronic
Equipment and its implemen tation into nation-
al legislation, electrical equipment that is no
longer usable must be collected separately and disposed
of in an environmentally correct manner.
® Independent